Skip to toolbar
Select Page

Setting up SP300 Potentiostat instrument

  1. To connect to the SP300 instrument open the EC-Lab software on the PC then click on Add Device.
  1. If a Windows Firewall notice appears select “allow access”.
  1. The New Device screen should appear with details of the SP300, including the IP Address: Click on this device and then click Select.
  1. The instrument should now be connected and ready to run a test.


Installing EC-Lab software

The latest version of EC-Lab software can be found here:

The current version (as at 18 July 2016) is 11.01

Download the software to the PC then double click on the .exe file to install it.


Other information

The Mac address of the instrument is 00:14:D8:01:07:F1